Special Effect Company Roger George Rentals

Troubleshooting

Methylcellulose Tips and Troubleshooting

RECIPE FOR 1 GALLON OF SLIME/GOOP 1.Measure powdered methyl cellulose based on desired viscosity: Thin viscosity “slime” 5 1/2 oz = 1 scoop = 45g powdered methyl cellulose Medium viscosity “goop” 7 3/4 oz = 1.5 scoops = 68g powdered methyl cellulose Heavy viscosity “double thick goop” 11 oz = 2 scoops = 90g powdered methyl cellulose 2. Divide methylcellulose…

Read More→

Smoke / Fog Fluid Guide

Smoke / Fog Fluid Guide Smoke fluid, Fog fluid, Haze fluid, atmospheric effects, ground fog, long lasting, quick dissipating, there are so many types of fog machines and fog fluids that it can be easy to lose track of what type of fluid is used for what effect. Here at Roger George, we’ve put together a simple guide to help…

Read More→

Low Smoke Generator (LSG) Troubleshooting

*G300 Fog Machine Troubleshooting Redirects here*   How to set up and run a Low Smoke Generator (LSG) using a G300 fogger:   1: Place the machine on a level surface and ensure that it will not roll. 2: Connect the blue Twist-lock connector from the LSG to the custom port on the rear panel of the G300 3: Position…

Read More→

G300 Fog Machine Troubleshooting

How to set up and run a G300 Fog Machine   1: Place the machine on a level surface and ensure that it will not tip or slide. 2: Connect the power cable to an isolated 20A circuit (Due to the high current draw of these machines, plugging them into cube-taps or plug-strips may cause shorts and tripped breakers/fuses. It…

Read More→

Dynafogger Golden Eagle Troubleshooting

Dynafogger Golden Eagle TroubleShooting This post applies to the Dynafogger Golden Eagle Fogger; however, it is similar to the Dynafogger Trail Blazer Fogger. If you have a Trail Blazer, many troubleshooting steps are the same.   Setting Up and Running the Machine: 1: Fill the “Fuel Tank” with gasoline and make sure there are no spills or leaks on the…

Read More→

Viper NT Troubleshooting Guide

How to set up and run Viper NT Fog Machine: Viper NT Control Panel Diagram Operating a Viper NT Fog Machine 1: Place the machine on a flat, level surface. 2: Connect the Power Cable to an outlet and the Fluid Line to a bottle of Look Solutions Fluid 3: Wait for the Ready LED Light to turn Solid Green,…

Read More→

Aquafogger Troubleshooting

AquaFogger Troubleshooting How to set up and Run an AquaFogger 1: Place the machine where it will be used. Ensure that it is on level ground and that it will not roll. 2: Fill the tank to the Fill Line with plain tap water. The fill line is visible under the stainless steel ice basket inside the plastic tank. Do…

Read More→